Essence PLUS: Non-Abrasive Gloss Agent

Non-Abrasive Gloss Agent & Top Coat Jeweler
Imagination becomes reality… Introducing an incredible new tool for detailers around the world!

Let's get one thing out of the way first… CARPRO Essence Plus is not Essence… Where Essence could go under the coat, Essence Plus can go over the coat. Essence Plus is a unique, easy to use, SiO2 coat made from a distinct blend of ceramic coat repair agents, high gloss quartz resins, and hydrophobic nanoparticles!

The concept behind Essence Plus was an extremely glossy, semi-permanent nano-agent for repairing durable ceramic coatings, which have been abused or mistreated over the course of time. Historically, the only option that a technician had was to polish or compound the damaged ceramic coating and then re-coat, starting from scratch.

However… over the course of development, Essence Plus grew into something… unexpected but equally satisfying! It is not coated… but uncoated paint that finds its way into the “cross-hairs” of Essence Plus!

With Essence Plus, we introduce you to the first non-abrasive solution to partially repair fine swirls, when an abrasive correction is not in the cards! While increasing the gloss, Essence Plus simultaneously cleanses the surface, leaving a “smooth as glass” feel and amazing hydrophobic properties!

Features:
High gloss jeweling coat.
Repairs nano coatings.
Incredible on bare paint!
Adds layer of SiO2 Quartz protection.
Excellent hydrophobic agent.
Produces extreme gloss.
Use with D/A or by hand.
Cleans, glosses, and protects: Bare paint, PPF, chrome, and glass.
Formulated for professional use on previously coated vehicles.

Preparation:
1. Wash with Reset, and decontaminate with Iron X, Spotless, and if needed Tar X. Wash and rinse thoroughly.
2. Dry vehicle and wipe down with CARPRO Eraser for clean oil free surface.

Via Dual Action Polisher:
1. Prime CARPRO Gloss Pad with Essence Plus.
2. Apply with no pressure in multiple overlapping passes on speed 1-3 across 24” x 24” (60cm x 60cm) section.
3. Clean pad with brush and apply 3 pea size drops to the pad.
4. Move to next section and repeat steps 2-3.
5. Continue around entire vehicle in this manner and do not wipe off the residue until at least 30 minutes later.
6. Wipe excess residue off of entire vehicle.

Via Hand:
1. Wash and dry vehicle.
2. Apply a few pea size dots of Essence Plus to the applicator.
3. Apply in overlapping figure circular motions across 24” sq. +/- and work into surface similar to a “polymer sealant” (liquid wax) application method.
4. Move to next section and repeat steps 2-3.
5. Continue around entire vehicle in this manner.
6. Allow to cure for at least an hour.
7. Wipe excess residue off of entire vehicle.

Precautions:
• On coated surfaces – If using machine, use only with CARPRO Gloss Pad.
• On coated surfaces - Avoid “edging” pad into a curve and keep pad flush with paint.
• Keep container tightly closed after use.
• Keep container out of the sun.
• Test product on inconspicuous area before use.
• Store in cool dry place.
• Keep away from children.
• Do not ingest.
• Not for use as a primer.